|
Digital Breath Analysis
Description: Safety solutions inc breath analyzer detects the alcohol concentration in the breath of the person under observation and gives an indication in digital meter. Instrument gives audio alarm if the blood alcohol concentration is more than the set level. The instrument is easy to use.
- Sensor: Semi Conductor Sensor
- Initial Time: Less than 1 Minute before first test
- Wait Time: Less than 30 Seconds between two tests
- Ready for test: Ready indication to glow and analogue meter indication is near to zero
- Breath Sample: Blow Deep lung air on the Sensor window from a distance of 5 cm approximately
- Test Result: Meter indication will show reading in BAC. If the BAC is more than the SET level then Fail LED will glow with buzzer sound.
- Next Test: Press Reset Button and wait for Ready indication.
| Indications |
| Power On / Wait |
Red LED |
| Low Bat |
Yellow LED |
| Ready / Fail |
Green / Pink LED (dual) |
| Switches
& Sockets |
| Slide Switch |
To Power On |
| Reset Switch |
To Reset |
| Socket |
To connect Charger cum Adapter |
| Physical Properties |
| Size |
68 (L) X154 (H) X33 (w) +5% in mm |
| Weight |
415 gms+10% with Batteries with carrying case |
Environment
- Operating temperature :5 to 50 degree celsius
- Power 5xAA Size rechargeable cell or 5xAA size dry cells or by connecting to charger cum adapter supplied along with the instrument in adapter Mode and no batteries inside the instrument.
Charging
If Low Bat (Red LED) indication glows, then switch off the instrument connect to the charger cum adapter in charger mode and switch on the charger. Charge LED will glow on the instrument. Charge for 4 to 6 Hours.
|
